E-mail : info@silverengineer.com
Whatsapp & Wechat :0086-15216689661
-
AboutSE was founded in 2010 located in Shanghai. In 2014 moved to Jiashan, Zhejiang Province. We were committed to providing overall solutions for the transformation and upgrading of the Global Aluminum Foil Packaging Industry in the New Era.
-
MACHINEAluminum Foil Container Machine Foil Feeding Machine Foil Scrap System Foil Lid Cutting Machine Foil Rolls Machine Pop Up Sheet Machine Paper Sheet CuttingMachine Paper Die Cutting MachineWith 4 Moulds Automatic Plastic LidThermoforming Machine
Mechanical equipment
Embossing Version Feeder E
Key words:
Category:
Details
Technical Data
|
Model |
Embossing Version Feeder E |
|
Aluminum Foil Type |
Non-Lubricated and Lubricated Foil Material |
|
Aluminum Container Type |
Wrinkle Wall Container and Smooth Wall Container |
|
Oil Type |
Thick Oil,Fresh Point No Limited |
|
Oil Tank Position |
Closed Oil Tank under Feeder |
|
Oil Coating Type |
Foil Roller Coating |
|
Oil Filling Way |
Automatic Refill |
|
Oil Coating Quantity |
300-500mg/sqm |
|
Oil Polluted |
Auto Filtrate and Cycle Clean |
|
Number of Rollers |
6sets |
|
Feeding Wrinkle Performance |
No wrinkle Problem |
|
Motor power |
1.5KW |
|
Effective width of embossing |
850 |
Features:
1. Satisfactory printing effect can be obtained from 0.035mm - 0.15mm aluminum foil, and different patterns or logos can be customized according to demand.
2. Low printing cost, low screen cost and low ink consumption in the printing process.
3. Corona is applied to the raw material of aluminum foil before flexo printing to increase the adhesion on the surface of aluminum foil.
4. UV fast drying of aluminum foil raw material can be done after flexo printing on pattern.
Next： None
Message
CONTACT DETAIL
-
Add:NO.11, Baoqun West Road, Jiashan, Jiaxing, Zhejiang
Tel: +0086-18857382781
E-mail: info@silverengineer.com
Online message